First and Second Stage 136 Single Disc Mills
Proven technology updated
CCMC’s 136 single Disc Mills are designed for optimum performance. Our engineers focused on structural stability to minimize vibration, reducing maintenance cost and solidifying the tram control. The results produced one of the finest wet corn disc mills on the market today.
The 136’s heavy construction and rigid refiner case supports maintain tram alignment unsurpassed in the industry. With heavy duty motor supports, 1”(2.54cm) thick mounting plate and 2”(5.08cm) diameter threaded motor mounting rods, vibration is greatly reduced. Additionally, all process contact parts are constructed with 316 stainless steel for increased operating life.
Quick release mechanism
The location of the grind disc, which controls plate gap, is accurately controlled within thousandths of an inch by a hand wheel and indicator dial. The disc is held in position with springs that maintain a constant loading pressure. CCMC’s quick release mechanism is designed for simple and easy retraction of the grind disc, and includes a safety lock that prevents accidental clashing of the grind plates.
The INPRO/SEAL bearing isolator
CCMC has incorporated into the design of the 136 Single Disc Mill one of the industry’s finest bearing isolators - the INPRO/SEAL bearing isolator. This design provides a positive vapor seal when the seal is stationary but has no contacting parts when the shaft is rotating. The INPRO/SEAL bearing isolator hermetically seals the bearing housing from any possible contaminate in the bearings and the lubricating medium.
Quick belt change
One of the 136 Single Disc Mill’s exclusive feature is the quick belt change option. This feature was designed with efficiency in mind and for simplified maintenance of the drive belts, resulting in less downtime.Changing belts is a simple three step operation. After the belt tension is released and the anchor bolts removed from the outboard housing, the support blocks are pulled-out from under the bearing housing, allowing the old belts be easily removed. Reverse the process and installation of new belts is just as simple.
36”(91.4cm) diameter disc
1,800 RPM maximum speed
Grease lubricated bearings
Hinged door swings both ways for ease of plate changes
Manual disc positioning
Quick release mechanism
All process contact parts 316 stainless steel
Belt drive with extra heavy duty motor supports
Approximate weight (less motor) 6,600 lbs(2994kg)
1st grind-20,000 bushels/day (510 metric tons/day)
2nd grind-40,000 bushels/day (1020 metric tons/day)
Changchun Meichen Machinery Co., Ltd.
Changchun Meichen Machinery Co., Ltd. is a joint venture associated by US Komline-Sanderson Engineering Corpration and Fluid-Quip Asia LLC which is situated at Zhongyan West Road, Luyuan Economic Development Zone, Changchun City, having plant area 8,000m2. It is a modern enterprise integrates design, manufacture and site service, which owns technical experts with rich experience and devoted concentration, more than 100 employees including 30% of engineering technicians and 20% of senior technicians. Our main products are complete equipment including Rotary Drum Vacuum Filter (RDVF-KS brand), Evaporator, Flash Dryer, Pressure Screen, Disc Centrifuge (FQ brand), Tube Bundle Dryer, Corn Wet Milling Equipment. We can design and install the whole set of corn wet milling. Our products and services are sold to the countries in Europe, America and Southeast Asia, and widely applied in the industries of chemical engineering, corn deep processing, paper making, power station, industry as well as municipal sewage treatment and sludge dewatering. CCMC will follow the concept of perfections pursuit, scientific and technological innovation and full service to conduct technological innovation and service improvement and increase competitiveness for customers, and use its complete quality control system to ensure the safety and reliability of each product.
- Company Name: Changchun Meichen Machinery Co., Ltd.
- Representative: Liu Jing
- Product/Service: Rotary Drum Vacuum Filter , Tube Bundle Dryer , Multi Effect Evaporator , Screen Box , Heat Exchanger , Starch Washing System
- Capital (Million US $): 3000000RMB
- Year Established: 2012
- Total Annual Sales Volume (Million US $): US$10 Million - US$50 Million
- Export Percentage: 41% - 50%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 3
- No. of R&D Staff: 21 -30 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: No. 2919 Foshan Street, Economic Development Zone, Changchun, China, 130102
- Contact Person: Ms. Zou Ling
- Tel: 86--15844171252
Premium Related Products